Trough idler support

Trough idler bracket is classified by Angle: Trough idler bracket, as the name suggests, is a trough Angle, which can be divided into 35 degree trough bracket, 45 degree trough bracket, and 35 degree trough forward bracket according to different angles. According to the material transportation Angle, the greater the groove Angle, the greater the conveyor capacity. Therefore, when choosing the Angle, it should be customized according to its own throughput.

Category:

Bracket

E-mail:

sale@hbgbmachine.com

Inquire Now

Related Product

Share to

Description

Trough idler bracket is classified by Angle: Trough idler bracket, as the name suggests, is a trough Angle, which can be divided into 35 degree trough bracket, 45 degree trough bracket, and 35 degree trough forward bracket according to different angles. According to the material transportation Angle, the greater the groove Angle, the greater the conveyor capacity. Therefore, when choosing the Angle, it should be customized according to its own throughput.

Types: Trough bracket according to the type is divided into: trough aligning bracket, trough forward bracket, trough bracket, trough buffer roller bracket and so on. Among them, the trough type aligning bracket is special and has the function of correcting deviation, which is mainly used to prevent the deviation of conveyor during operation. Trough bracket 堒 bracket is one of the important components of the belt conveyor, according to its model can be divided into TD75 type and DTII type idler bracket. A roller support device is a roller support device that facilitates the replacement of a roller, and comprises a deflector roller support, a support, a pin, a body, a roller, a limit block and a fastener. The lower end of the support is connected with the upper end of the fuselage with fasteners, and the support is connected with the deflected roller support with a pin shaft, and a roller is arranged on the deflected roller support. A slot for rotating around the pin shaft is provided on the deflected roller support, and the roller is installed in the slot for rotating the deflected roller support, and a limit block for controlling the deflection Angle is provided on the deflected roller support.

The support or body is provided with a pin around which the deflector idler support can rotate. With the fastener removed, the deflector idler support can rotate around the horizontal fixed pin under the control of the limit block. The trough bracket belongs to a kind of roller bracket. Adopt production technology to ensure product quality. The trough roller can remove the belt dirt, and the force is large on the slope belt, the resistance is small, and the effect is good. The double section roller can reduce the heavy pressure point of the belt on the ceramic roller, and the hollow device of the roller can make the stick drop by itself, without sticking on the roller, and can extend the service life of the roller. The advantages and functions of the idler aligning bracket are as follows:

1, roller support strong support, high flexibility, low friction, long life.

2. Radial runout of roller support; Flexibility; Axial channeling momentum.

3, roller support dust, waterproof, axial bearing, impact resistance, service life five key points.

4, the roller bracket is installed on both sides of the conveyor belt to prevent the conveyor belt from running off. Effectively makes the tape run smoothly and reliably.

5. The aligning effect of the roller support is remarkable, and the structure is simple, which can fully meet the needs of modern operation development.

The roller aligning bracket is a kind of accessory device of conveying machinery, which has its very important existence value and advantages

Hot Tags:

Inquire Now

We will contact you within one working day. Please pay attention to your email.

Submit