75 groove type aligning bracket

The idler aligning support device is convenient to replace the idler support device, and consists of a deflector idler support, support, pin, fuselage, roller, limit block and fastener. The lower end of the support is connected with the upper end of the fuselage with fasteners, and the support is connected with a pin shaft and a deflector idler support, and the idler is arranged on the deflector idler support. A slot for rotating around the pin shaft is provided on the deflected roller support, and the roller is installed in the slot for rotating the deflected roller support, and a limit block for controlling the deflection Angle is provided on the deflected roller support. The support or body is provided with a pin around which the deflector idler support can rotate. With the fastener removed, the deflector idler support can rotate around the horizontal fixed pin under the control of the limit block. The trough bracket belongs to a kind of roller bracket. Adopt production technology to ensure product quality. The trough roller can remove the belt dirt, and the force is large on the slope belt, the resistance is small, and the effect is good. The double section roller can reduce the heavy pressure point of the belt on the ceramic roller, and the hollow device of the roller can make the stick drop by itself, without sticking on the roller, and can extend the service life of the roller.

Category:

Bracket

E-mail:

sale@hbgbmachine.com

Inquire Now

Related Product

Share to

Description

The idler aligning support device is convenient to replace the idler support device, and consists of a deflector idler support, support, pin, fuselage, roller, limit block and fastener. The lower end of the support is connected with the upper end of the fuselage with fasteners, and the support is connected with a pin shaft and a deflector idler support, and the idler is arranged on the deflector idler support. A slot for rotating around the pin shaft is provided on the deflected roller support, and the roller is installed in the slot for rotating the deflected roller support, and a limit block for controlling the deflection Angle is provided on the deflected roller support. The support or body is provided with a pin around which the deflector idler support can rotate. With the fastener removed, the deflector idler support can rotate around the horizontal fixed pin under the control of the limit block. The trough bracket belongs to a kind of roller bracket. Adopt production technology to ensure product quality. The trough roller can remove the belt dirt, and the force is large on the slope belt, the resistance is small, and the effect is good. The double section roller can reduce the heavy pressure point of the belt on the ceramic roller, and the hollow device of the roller can make the stick drop by itself, without sticking on the roller, and can extend the service life of the roller.

The advantages and functions of the idler aligning bracket are as follows:

1, roller support strong support, high flexibility, low friction, long life.

2. Radial runout of roller support; Flexibility; Axial channeling momentum.

3, roller support dust, waterproof, axial bearing, impact resistance, service life five key points.

4, the roller bracket is installed on both sides of the conveyor belt to prevent the conveyor belt from running off. Effectively makes the tape run smoothly and reliably.

5. The aligning effect of the roller support is remarkable, and the structure is simple, which can fully meet the needs of modern operation development.

The roller aligning bracket is a kind of accessory device of conveying machinery, which has its very important existence value and advantages

Hot Tags:

Bracket

Inquire Now

We will contact you within one working day. Please pay attention to your email.

Submit