Conveyor belt product solutions expert
Close
- Inquiry
Bracket
Key words:
Products
News
Friction aligning bracket, DT-II type aligning bracket, friction aligning bracket. The aligning bracket can be aligning large cylindrical diameter or aperture, effectively improving the correction ability of the belt deviation, reducing the damage to the belt edge, and increasing the service life of the belt. The wing roll is also called the stop roll or the vertical roll, which is mainly connected with the aligning bracket, and is a product used in the aligning roller, which is installed on both sides of the conveyor belt to prevent the conveyor belt from running off. That is to say, when the belt deviates, one side of the vertical roll is squeezed, and the vertical roll rotates around the rotating shaft on the rotating mechanism through the moving rod, and the rotating shaft drives the tie rod to rotate, and finally the tie rod drives the whole roller set to rotate
Key words:
The conical roller support device is convenient to replace the roller support device, which comprises a deflector roller support, a support, a pin, a body, a roller, a limit block and a fastener. The lower end of the support is connected with the upper end of the fuselage with fasteners, and the support is connected with the deflected roller support with a pin shaft, and a roller is arranged on the deflected roller support. A slot for rotating around the pin shaft is provided on the deflected roller support, and the roller is installed in the slot for rotating the deflected roller support, and a limit block for controlling the deflection Angle is provided on the deflected roller support. The support or body is provided with a pin around which the deflector idler support can rotate. With the fastener removed, the deflector idler support can rotate around the horizontal fixed pin under the control of the limit block.
Key words:
75 groove type aligning bracket
The idler aligning support device is convenient to replace the idler support device, and consists of a deflector idler support, support, pin, fuselage, roller, limit block and fastener. The lower end of the support is connected with the upper end of the fuselage with fasteners, and the support is connected with a pin shaft and a deflector idler support, and the idler is arranged on the deflector idler support. A slot for rotating around the pin shaft is provided on the deflected roller support, and the roller is installed in the slot for rotating the deflected roller support, and a limit block for controlling the deflection Angle is provided on the deflected roller support. The support or body is provided with a pin around which the deflector idler support can rotate. With the fastener removed, the deflector idler support can rotate around the horizontal fixed pin under the control of the limit block. The trough bracket belongs to a kind of roller bracket. Adopt production technology to ensure product quality. The trough roller can remove the belt dirt, and the force is large on the slope belt, the resistance is small, and the effect is good. The double section roller can reduce the heavy pressure point of the belt on the ceramic roller, and the hollow device of the roller can make the stick drop by itself, without sticking on the roller, and can extend the service life of the roller.
Key words:
Latest Products
Latest News
500 m North of Fengchi Turntable, Yanshan County, Cangzhou City, Hebei Province, China
